How To Keep Grout Clean The Easy Way

This post contains links to affiliate websites, such as Amazon, and we receive an affiliate commission for any purchases made using these links. Amazon doesn’t support my blog. We appreciate your support!

Anyone with tile floors or walls will need to know how to keep grout clean. Grout is the mortar that fills in the joints between tiles. Over time, grout can become stained and discolored, making your floors and walls look dirty. Cleaning grout is not difficult, but it does require some elbow grease.

Today I’ll be sharing top tips on how to keep grout clean. These tips should help you maintain your tiles in good condition and help them to last a long time.

How To Keep Grout Clean 

How Does Grout Get Dirty?

Grout can become stained for a number of reasons. Dirt, mildew, and mold are all common culprits. If you have tile in your bathroom or kitchen, these areas are especially susceptible to grout staining.

Whether you’re cleaning kitchen tile grout or floor tile grout the following tips are sure to come in handy if you need to know how to keep grout clean.

Cleaning Grout Tiles

There are a few different ways to clean grout, depending on how stained it is.

For light cleaning, you can mix water and baking soda to form a paste. Apply the paste to the grout lines with a toothbrush or other small brush. Scrub the paste into the grout, then rinse away with water.

How To Keep Grout Clean With Natural Grout Cleaner

If your grout is more stained, you may need to use a stronger cleaner. There are many commercial grout cleaners on the market, or you can make your own by mixing water, vinegar, and baking soda. Apply the cleaner to the grout lines with a brush, then scrub and rinse away.

Bleaching Grout

You can also try bleaching your grout if it is very stained. Be sure to use non-abrasive bleach, such as chlorine bleach, and take care not to get any on your tile or countertops. Apply the bleach to the grout with a brush, then rinse away thoroughly.

Preventing Stains On Tile Grout

The best way to keep grout clean is to prevent stains in the first place. Seal your grout lines after they are installed or cleaned to create a barrier against stains. You can buy grout sealers at most hardware stores.

Be sure to clean up spills quickly, before they have a chance to stain the grout. And try to keep your floors and counters as clean as possible to avoid dirt and grime build-up.

Clean Your Tiles Regular

Regular cleaning and sealing will keep your grout looking its best. Clean your tile floors and counters weekly with mild soap and water. You can also use a steam cleaner for deeper cleaning.

And don’t forget to clean grout lines when you see them getting dirty. A little elbow grease now will save you time and effort later.

How To Keep Grout Clean The Easy Way

How To Keep White Grout Clean 

White grout tends to be the most difficult to keep clean. It can show dirt and stains more easily than other colors. But there are a few things you can do to help keep tiles clean.

First, choose a grout with a sealant already applied. This will create a barrier against stains and dirt.

Second, avoid using dark-colored cleaners on white grout. They can stain the grout and be difficult to remove.

Finally, be sure to clean up spills quickly. White grout can show stains more easily than other colors, so it’s important to act fast.

With a little care and cleaning, you can keep your white grout looking its best.

Bonus Tip: Use a toothbrush to clean hard-to-reach places.

Cleaning grout can be a tedious and difficult task, but it’s important to do it regularly to keep your floors and walls looking their best. Follow these tips to make the job easier and prevent stains in the first place.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *